Default TP-Link Green (Opening ports solutions to help users to open Routers Ports)
step 1.
Manually set your network interface card ( NIC ) to use a static ip address.
Step 2.
Open you router page
gateway: 192.168.1.1
username: admin
password: admin
Step 3.
click on the “Forwarding” and then “Virtual Servers”.
click “Add New…
Step 4.
In “Service port” enter the ports to be forwarded.
Example: 5555 or 4200 – 4300
In the “IP Address” field put the local IP of the computer the ports will be forwarded to.
then select the protocol for the ports.
For “Status” choose Enable.
Click “Save”
Step 5.
Repeat steps for any more ports you need to forward.
Best Regards
